Why Your Driver's Hands Take a Beating Now: NASCAR's Steering Change, Explained
Why Your Driver's Hands Take a Beating Now: NASCAR's Steering Change, Explained
Welcome to the Happy Hour Racing Wednesday Tech Breakdown - where we take one confusing part of NASCAR and make it make sense. No engineering degree required.
The Short Version
When NASCAR built the Next Gen car, it threw out a steering setup that had barely changed since the 1950s and replaced it with the same kind your street car uses. The new system is lighter, sharper and far more honest about what the front tires are doing. It also has one catch. It passes a lot more of a crash straight back up the column into the driver's hands, and in 2026 that caught up with somebody.
Steering Is a Translation Problem
Here is the whole job in one sentence. The driver spins a wheel in a circle, the front tires need to swing left or right, and something in between has to translate round motion into side-to-side motion.
Think about a corkscrew. You turn the handle in circles and the screw moves straight down into the cork. Every steering system ever built is a different answer to that one problem. The answer NASCAR used for seventy years is nothing like the one it uses now.
The Old Way: A Gearbox and a Long Chain of Parts
The Gen 6 car and every Cup car before it used a recirculating-ball steering box, a sealed metal box full of gears and small steel ball bearings. The design was not borrowed from a race car. It came from a 1950s General Motors Saginaw truck.
The box only did part of the work. From there the motion walked through a whole chain of parts: a sector shaft, then a pitman arm that swung back and forth like a slow windshield wiper, then a long center link that pushed one front wheel and pulled the other, and finally the small rods bolted to the wheels.
That chain was tough, and that was the point. Every joint had a little slop in it, and a pile of parts with slop in each one soaks up a hit. The downside came with it. All those ball bearings meant friction, and all that slop meant backlash, the free play you feel when the wheel moves but the car does not. It got worse as parts wore out. Drivers were steering through a game of telephone.
Meet the Parts: a Rack, a Pinion and Two Rods
The Next Gen car uses rack-and-pinion steering, built by Woodward Machine Corporation, the single supplier NASCAR picked for the rack and the shaft. If you drive anything built in the last forty years, you already own one.
It is two pieces. The pinion is a small round gear on the end of the steering shaft. The rack is a straight bar with teeth cut into it, lying across the car. Turn the wheel, the pinion rolls, and because its teeth are locked into the rack, the whole bar slides sideways. Each end of that bar connects to a front wheel through a short rod. Bar goes left, wheels go left.
No gearbox, no swinging arm, no long link reaching across the car. Two gears doing in one step what used to take five.
Why It Felt So Strange at First
Drivers noticed immediately. Chris Buescher tested the car at Daytona before it ever raced and said the steering was "way quicker than anything I've ever driven, so we're doing our best to slow it down as much as possible. I think we've run out of adjustments." Austin Dillon put it in fewer words. It was a little quick.
That is not a complaint about quality. That is what happens when you delete the slop. The old box let a driver saw at the wheel and get away with it. The new rack does exactly what the hands tell it to do, right now.
What Came Up This Season
Nothing in the 2026 rule book touched the steering. This season's technical updates were about horsepower, the short-track aero package and A-post flaps. What changed is the conversation, and it started in June at Michigan.
NEWS @CBellRacing suffered a fractured left wrist after an accident on lap 148 of Sunday's NASCAR Cup Series race at Michigan International Speedway.
- Joe Gibbs Racing (@JoeGibbsRacing) June 9, 2026
Bell walked out of that one, which says a lot about the rest of the car. He said his hand was at the six o'clock position on the wheel, wrist up, when the car hit the wall. The front tire took the blow. The wheel in his hands took it a heartbeat later.
Brad Keselowski put the cause on the steering. "A steering box with a center link, Pitman arm, toe link, had a lot of crush shell naturally built into it," he said at Pocono. "So, with the old car, even though it's a very antiquated system, it actually served the sport very well. You could have a lot of wheel-to-wheel contact and the system would absorb it without transferring it through to your arms and hands at the level that it does today with a rack and pinion."
Denny Hamlin added the detail that makes it click. Most drivers do not steer with two hands the way you were taught. As he put it, "my left hand does all the work and my right hand is just along for the ride." One hand carries the load, and one hand takes the hit.
Worth saying plainly: rack-and-pinion is not unsafe. Bell's wreck was the biggest hit of this era of the car, he walked away, and he has credited the car for that. Keselowski is pointing at something to work on down the road, not sounding an alarm.
What You Will Actually See On Track
Watch an in-car camera at a road course or a short track. The wheel barely moves. Small, quick corrections, hands mostly parked. That is the rack doing its job. On the old car you would see a driver winding through a bigger arc and catching the slop on the way back.
Then watch what happens on contact. When a car gets into the fence or trades paint wheel-to-wheel, look at how violently the wheel snaps in the driver's hands. That jolt is the front tire talking to the rack and the rack talking to the column. Nothing in between is there to soften it anymore.
The Bottom Line
NASCAR traded a 1950s truck part for a modern one and got exactly what it paid for on both sides of the deal. The driver feels everything the front tires feel. The driver also feels everything the wall does.
Keselowski has been the one saying the quiet part out loud about this car all year. If he is your guy, the No. 6 two-sided paint scheme tee is in stock, and the rest of his gear is up. Riding with somebody else, browse all the driver collections. New tech breakdowns drop every Wednesday.







